Holce Snowboard

Flat boards take less effort to drive into the turn, creating a more leisurely overall ride. They still put energy into the entire edge length through the turn as you are compressing the arc of the sidecut. Flat camber is traditionally found on more freestyle/park-focused boards and entry-level

Constructed from vertically laminated stringers of poplar, reinforced with additional birch stringers, this core delivers a mid-flex but poppier overall feel through the length. The stiffer birch creates a livelier overall ride without being overly aggressive.

Bi-Ax glass is formed by stitching together glass fibres orientated at 0° and 90°. This layup reinforces the board along its length and width, allowing for a softer twisting (torsional) flex. Bi-ax glass creates a more forgiving and playful ride by allowing the board to flex torsionally.

Carbon beams run from the insert packs to the contact points in a V formation. These drive energy directly to the contact points to give a fast turn initiation and exit while stiffening up the tips for more power and drive.

A sintered base is manufactured by compressing small granules of plastic together to form a block. This is then shaved into sheets to create a porous plastic that forms the base. Sintered bases are tougher and faster than extruded bases, but they need to be waxed to deliver their performance.